ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_'abcdefgh
BCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_'abcdefghi
CDEFGHIJKLMNOPQRSTUVWXYZ[\]^_'abcdefghij
DEFGHIJKLMNOPQRSTUVWXYZ[\]^_'abcdefghijk
EFGHIJKLMNOPQRSTUVWXYZ[\]^_'abcdefghijkl
FGHIJKLMNOPQRSTUVWXYZ[\]^_'abcdefghijklm
GHIJKLMNOPQRSTUVWXYZ[\]^_'abcdefghijklmn
HIJKLMNOPQRSTUVWXYZ[\]^_'abcdefghijklmno
IJKLMNOPQRSTUVWXYZ[\]^_'abcdefghijklmnop
Figure l-14.
Self-test
9
Self-Testing the Printer
To
self-test
the printer, follow these steps:
l
First,
be sure that you have a sheet of paper at least 8½ inches
wide loaded into the printer.
l
Be sure the DIP switches under
the dust cover are set to match
the setting below:
Figure l-15. DIP switch setting
for self-test
l
Adjust
the paper pressure bar as shown in Step 8.
l
Turn OFF the printer using its ON-OFF switch.
Now, turn ON the printer while holding down the LF button.
The printer will immediately begin printing out the self-test
characters shown above.
To stop the test, simply turn OFF the printer, or
wait for it to
stop when it reaches the bottom of the page.
17
Summary of Contents for SQ-2000
