How To Use
This product is an automated color measurement system that can be installed on the printer. For supported printers,
see the catalog or the printer's manual.
This section introduces color measurement procedures using the SpectroProofer Utilities found on the Software Disc
(SpectroProofer Software Disc) supplied with this product.
Note:
To use the SpectroProofer Utilities, you need to install the Epson printer driver on your computer in advance. You cannot use
this utility with printers that are not supported by the Epson printer driver.
Procedures
A
Confirming the printer setup
Make sure to complete the printer setup (setting up the printer and installing the printer driver). Turn on the printer and make
sure it is in the ready state.
B
Color calibration
U
See
“Color calibration” on page 11
Calibrate your printer using Printer Linearization in the SpectroProofer Utilities.
C
Color measurement
U
See
“Preparing and executing a color measurement job” on page 12
Select a job by starting
Preparing and executing a color measurement job
in the SpectroProofer Utilities.
When you start
Job status confirmation
on the SpectroProofer Utilities, you can check the status of the current job.
See the online help for details.
Power Supply
This product has no power button.
The power is on when you connect the printer connection cable and turn on the printer.
The power is off when you turn off the printer.
c
Caution:
When using this product, first connect the printer connection cable, and then turn on the printer. This product does not
work correctly if you connect the printer connection cable when the printer is on.
SpectroProofer Mounter 17" User’s Guide
How To Use
8
