7
EN
Safety Instructions
Meaning of Symbols
The Symbols on the Product
The symbols on this Epson product are used in order to ensure safety and proper use of the product
and to prevent danger to customers and other persons, and property damage.
The symbols indicate the meaning below. Be sure that you completely understand the meaning of
symbols on this product before using it.
Stand-by
Alternating
Current
Symbols Used in This Manual
!
Warning
Warnings must be followed to avoid serious bodily injury.
!
Caution
Cautions must be followed to avoid bodily injury.
c
Important : Important must be followed to avoid damage to this product.
Note : Notes contain useful or additional information on the operation of this product.
Copyrights and Trademarks
EPSON®, EPSON EXCEED YOUR VISION, EXCEED YOUR VISION and their logos are registered trademarks
or trademarks of Seiko Epson Corporation.
Product Model Descriptions
Some models described in this manual may not be sold in your country or region.
Notes on Consumables
!
Caution
Do not shake the ink cartridges too hard.
Ink may leak from the cartridge if you shake it too hard.
Do not disassemble the ink cartridges or the maintenance box.
If it is disassembled, ink could get in your eyes or adhere to your skin.
If ink contacts your skin or enters your eyes or mouth, immediately take the following actions.
❏
If ink adheres to your skin, immediately wash it off using soap and water.
❏
If ink enters your eyes, rinse immediately with water. Failure to observe this precaution
could result in bloodshot eyes or mild inflammation. If problems persist, consult a physician
immediately.
❏
If ink enters your mouth, consult a physician immediately.
Store the ink cartridges and the maintenance box in a location out of reach of children.
Notes on Paper
!
Caution
Do not rub the edges of the printing paper with your hand.
The edges of the paper are thin and sharp and could cause an injury.
Notes on the Print Stacker
!
Caution
When opening and closing the bottom tray of the print stacker, keep your hands away from the
joints between the tray and the stacker itself.
Otherwise, your fingers or hands may be caught causing an injury.
Other Notes
❏
Before moving the printer or installing optional accessories, unplug all power cables to
completely turn off the power.
❏
Be sure your power cable meets relevant safety standards of the area where you plan to use it.
❏
Connect all equipment to properly grounded power outlets.
❏
Do not put your hand inside this product or touch the printer head during printing.
❏
Do not put your hand inside this product or touch the white flat cable during printing.
