Epson SC-F2100 SERIES User Manual Download Page 12

Page: 12 / 143

Rear section

AC inlet

Connect the supplied power cable here.

Waste ink outlet

An outlet for the waste ink tube. Waste ink is ejected from here. They are on both the left and right sides.

Tube clamp

A clamp that fixes the waste ink tube to the printer. Use the remaining clamps to secure the cables if necessary.

Setup Guide

(booklet) for details on attaching and removing the clamp.

Waste ink bottle holder

A holder to fix the waste ink bottle.

Waste ink bottle

A bottle for collecting waste ink. When the waste ink reaches the line on the bottle, replace it with a new waste ink
bottle.

“Replacing the waste ink bottle” on page 86

Waste ink tube

Insert this into the waste ink outlet and the waste ink bottle.

Setup Guide

(booklet) for details on installing.

SC-F2100 Series User's Guide

Introduction

Summary of Contents for SC-F2100 SERIES
















































































































































Search results

Summary of Contents for SC-F2100 SERIES

Reviews:

Related manuals for SC-F2100 SERIES

Brands by name

Popular brands

Epson SC-F2100 SERIES, User Manual

Search results

Summary of Contents for SC-F2100 SERIES

Reviews:

Related manuals for SC-F2100 SERIES

Brands by name

Popular brands