Head Cleaning
U
Print Adjustments
Use this menu in the following cases.
Using new media not registered to the printer
Perform
Automatic Adjustment
after loading media to
the printer.
When banding or graininess is found in the print
results even after Automatic Adjustment is
performed
Perform
Print Head Alignment
and
Media Feed
Adjustment
manually.
When changing Advanced Settings after saving
media settings
Automatic Adjustment
Print head position and media feed are adjusted while
printing the pattern.
The approximate maximum length of the media
required to print the test pattern is given below.
Approx. 600 mm (23.62 in.)
A
Check that the printer is ready, and load the
media according to the actual usage conditions.
When using the Auto Take-up Reel Unit, attach
the media to the roll core.
U
U
“Using the Auto Take-up Reel Unit” on
B
Press
, and then press in the order of
Media
Settings
-
Print Adjustments
-
Automatic
Adjustment
.
C
Press
Start
.
Auto adjust starts, and an adjustment pattern is
printed. Wait until adjustment is complete.
Print Head Alignment
Auto
The same adjustment as Print Head Alignment of
Automatic Adjustment is performed.
The approximate maximum length of the media
required to print the test pattern is given below.
Approx. 300 mm (11.81 in.)
A
Check that the printer is ready, and load the
media according to the actual usage conditions.
When using the Auto Take-up Reel Unit, attach
the media to the roll core.
U
U
“Using the Auto Take-up Reel Unit” on
B
Press
, and then press in the order of
Media
Settings
-
Print Adjustments
-
Print Head
Alignment
-
Auto
.
C
Press
Start
.
Auto adjust starts, and an adjustment pattern is
printed. Wait until adjustment is complete.
Manual
You can select
Manual(Simple)
or
Manual(Standard)
to make adjustments.
Manual(Simple)
Select this when Auto adjustment has failed or when you
want to perform quick and simple adjustment by
visually inspecting the pattern.
Manual(Standard)
Select this when you want to perform adjustment
equivalent to Auto adjustment by visually inspecting the
pattern.
The approximate maximum length of the media
required to print the test pattern is given below.
Manual(Simple): Approx. 50 mm (1.96 in.)
Manual(Standard): Approx. 150 mm (5.9 in.)
SC-F10000H Series/SC-F10000 Series User's Guide
Basic Operations
93