Epson SC-B9000 Series, Setup Manual

Page: 3 / 28

EN
Choosing a Place for the Printer
TC 選擇放置印表機的位置
Instructions for Placing the Printer
Leave adequate room as shown in the table for setting up the printer.
❏
Choose a flat and stable location that can support the printer weight (about 280 kg).
❏
The printer requires two power cables supplying a total amperage of 20A at 100v or 10A at 240V.
❏
If the combined capacity can not be supplied by a single outlet, connect the cables to different
outlets with independent power sources.
Operate the printer under the following conditions:
❏
Temperature: 15 to 35°C (20 to 30˚C recommended)
Humidity: 20 to 80% without condensation
Even the conditions above are met, you may not print properly if the environmental conditions
❏
are not proper for the paper. See the instructions of the paper for more detailed information.
Keep the printer away from drying, direct sunlight, or heat sources to maintain the appropriate
❏
humidity.
Avoid locations subject to dust and sand.
❏
放置印表機的說明
請依照圖示，在桌面上預留足夠的空間以設置印表機。
❏
選擇一處能承受印表機重量的平穩位置。（約
❏
280 kg
）
電源線的數量和總安培數如下：
❏
2
條電源線；
100V
時總安培數為
20A
，
240V
時總安培數為
10A
若組合電流無法由單個插座提供，請將電源線連接至具備獨立電源的不同插座。
請在下列環境中操作印表機：
❏
- 溫度：
15
至
35
℃ ( 建議
20
至
30
℃ )
- 濕度：
20
至
80%
沒有凝結
即使符合了上述條件，但如果環境條件不適合紙張，還是可能無法正確列印。詳細資料，請
❏
查看紙張的操作說明。
避免將印表機放在過於乾燥、陽光直射、或高溫之處以維持適當的濕度。
❏
避開容易有灰塵和沙子的位置。
❏
3