Epson SC-B9000 Series, Setup Manual

Page: 18 / 28

EN
Connecting the Power Cable
TC
連接電源線
c
Check that the status of the levels are OK as shown in
the illustration before moving to the next step.
The indicates that the status of the printer is not level.
You can adjust the printer's level by using the adjusters.
After adjusting the adjusters, we recommend checking
that the casters are raised from the floor.
進到下一個步驟之前，請先查看水平的狀態是
OK
，
如圖所示。
表示印表機的狀態是不在水平位置。
您可以使用固定旋鈕來調整印表機的水平位置。
調整了固定旋鈕後，建議確認腳輪有從地板升起。
[ [ [ [ 2 [
[8