Epson Research and Development
Page 9
Vancouver Design Center
S5U13L03P00C100 Evaluation Board User Manual
S1D13L03
Issue Date: 2014/05/15
XB1AG001
Revision 1.0
JP1, JP2, JP3, JP5 - Power Supplies for the S1D13L03
JP1, JP2, JP3, JP5 can be used to measure the current consumption of each S1D13L03
power supply.
When the jumper is at position 1-2, normal operation is selected.
When no jumper is installed, the current consumption for each power supply can be
measured by connecting an ammeter to pin 1 and 2 of the jumper.
The jumper associated with each power supply is as follows:
JP1 for COREVDD
JP2 for PLLVDD
JP3 for IOVDD
JP5 for PIOVDD
Figure 3-2: Configuration Jumper Locations (JP1, JP2, JP3, JP5)
