Epson Research and Development
Page 17
Vancouver Design Center
S5U13L03P00C100 Evaluation Board User Manual
S1D13L03
Issue Date: 2014/05/15
XB1AG001
Revision 1.0
4.6 LCD Panel Interface
The LCD interface signals are available on connectors H3 and H5. For S1D13L03 LCD
interface pin mapping, refer to the
S1D13L03Hardware Functional Specification
,
document number xxxxxxxxxx.
ConnectorH3 is 0.1x0.1” 40-pin header (20x2), Connector H5 is 0.5mm pitch FPC
connector. For the pinout of connectorsH3 and H5, see “Schematic Diagrams” on page 21.
Note
Connector H3 is no mounted. Connector H3 is optional. Therefore Connector H3 is only
allocated are for mounting. To use this area for mounting H3, it is recommended to use
the header of the size mentioned above.
The following diagram shows the location of the LCD panel connectors H3 and H5.
Figure 4-3: LCD Panel Connectors Location (H3, H5)
For the pinout of connectorsH3 and H5, see “Schematic Diagrams” on page 21.
