background image

NOTICE

No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko 
Epson.  Seiko Epson reserves the right to make changes to this material without notice.  Seiko Epson does not assume any lia-
bility of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or cir-
cuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as, 
medical products.  Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there is 
no representation or warranty that anything made in accordance with this material will be free from any patent or copyright 
infringement of a third party.  This material or portions thereof may contain technology or the subject relating to strategic 
products under the control of the Foreign Exchange and Foreign Trade Law of Japan and may require an export license from 
the Ministry of International Trade and Industry or other approval from another government agency.

All other product names mentioned herein are trademarks and/or registered trademarks of their respective companies.

©SEIKO EPSON CORPORATION 2009, All rights reserved.

Summary of Contents for S5U12517P00C100

























Reviews: