Epson S1S65010 Technical Manual Download

Page: 32 / 40

6. SPECIFICATIONS

S1S65010

EPSON

Evaluation Board Technical Manual (Rev. 1.1e)

<LAN debugging>

Debugging of the reference code is also possible over a LAN cable connected to a PC. Note, however,
that a direct connection to a PC requires a cross cable.

The following is the procedure.

1. Connect the two boards (main and camera).

2. Connect the power supply to the power supply connector.

3. Turn on the green power supply LED on the board to light.

4. Connect the kit to the PC with an Ethernet cross cable or to a hub with a straight cable.

5. Change the PC’s IP address to match the target.

This evaluation board set the default IP address 192.168.1.253, so make sure that there are no
duplications of IP addresses.

We recommend the following Japanese free software for changing the PC’s IP address.

Win95 Series:

KemaNet

http://www.vector.co.jp/soft/win95/net/se060975.html

Win2K Series:

valhell IP config

http://www.vector.co.jp/soft/winnt/net/se132582.html

6. Test the cable connection and IP address setting with the following console command.

ping 192.168.1.253

If everything is functioning correctly, there should be a response similar to the following.

------------------------------------------------

Pinging 192.168.1.253 with 32 bytes of data:

Reply from 192.168.1.253: bytes=32 time<10ms TTL=128

Ping statistics for 192.168.1.253:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms

------------------------------------------------

7. Boot the PC’s Web browser (Internet Explorer, Netscape, etc.)

If the Java plug-in has not been installed, download it from the following URL.

http://java.sun.com/getjava/ja/install-windows.html

8. Access the following address with the Web browser.

http://192.168.1.253/

9. Click on “

Continuous image

” on the menu screen that appears.

10. Input the user name and password, then start capturing/monitoring. This board ships with only one

user and the following default password.

User name: root

password: administrator

Summary of Contents for S1S65010









































Search results

Summary of Contents for S1S65010

Reviews:

Related manuals for S1S65010

Brands by name

Popular brands

Epson S1S65010, Technical Manual

Search results

Summary of Contents for S1S65010

Reviews:

Related manuals for S1S65010

Brands by name

Popular brands