Epson RX595 - Stylus Photo Color Inkjet, Service Manual, Page: 104 / 131

EPSON Stylus Photo RX585/RX595/RX610 Revision B
Adjustment Adjustment by Using Adjustment Program 104
5.2.5 PF Adjustment
† PF-Standard Area
Patterns are printed as shown below.
Figure 5-6. PF Adjustment (Standard Area) Pattern
How to Judge
Enter the value for the group that has no gap or overlap between the upper and the
lower patterns.
†
PF-Bottom Edge Area
Patterns are printed as shown below.
Figure 5-7. PF Adjustment (Bottom Edge) Pattern
How to Judge
Enter the value for the one that has no gap or overlap between the upper block and the
lower block.
Example: In the above figure, “0” should be selected.
Additional information
In case that all patterns have gap or overlap, select the value for the pattern which has
the least gap or overlap, and print the pattern again.
C H E C K
P O I N T
Example for judgement
4
2
0
-2
-4
5
3
1
-1
-3
-5
OK
NG
NG
C H E C K
P O I N T
Example for judgement
-2 -1 0 1 2 3 -3
Lower block
Upper block
OK NG NG
Gap Overlap