Changing the Projection
Mode
You can change the projection mode
to flip the image over top-to-bottom or
left-to-right using the projector menus.
1. Press the
Menu button.
2. Select
Extended > Projection.
3. Select a projection mode.
4. When you’re done, press the
Menu
button to exit.
You can also flip the image over
top-to-bottom by pressing the
Shutter
button on the remote control for about
five seconds.
Note: To rotate the menu display, change
the
OSD Rotation setting in the Extended >
Display menu.
Switching Between Image
Sources
Press the
Search button (remote
control) or one of the source buttons
(remote control or projector).
Changing the Screen Type
Setting
Set the Screen Type setting to the
screen’s aspect ratio.
1. Press the
Menu button.
2. Select
Extended > Display >
Screen > Screen Type.
2. Press the or arrow buttons to
make the adjustment.
3. Press the
Esc button to finish the
adjustment.
Correcting Image Shape
If your image is uneven on the sides,
you can use the projector’s distortion
correction features, such as
H/V-Keystone and Quick Corner
®
,
to adjust the shape. See the online
User’s Guide.
Making Other Image
Adjustments
For help on using the projector’s
features to improve the image quality,
see the online User’s Guide. You can
also view information on how to adjust
the image color, position, and edges
(Edge Blending) when projecting from
multiple projectors to create one
seamless widescreen image.
Turning the Projector Off
Press the
Standby button to turn the
projector off. If you see a confirmation
message, press the
Standby button
again.
Note: If the Direct Power On function is
enabled, you can unplug the projector or flip
the switch controlling the outlet to which the
projector is connected instead. To turn on
this feature, see the online User’s Guide.
With Epson’s Instant Off
®
technology,
you don’t have to wait for the projector
to cool down; just turn it off or unplug it
when you’re done.
Turning the Projector On
1. Turn on your computer or image
source.
2. Remove the lens cover.
3. Press the
On button. After the
status light stays blue, the projector
is ready.
Note: If the Direct Power On function is
enabled, you can turn the projector on
without pressing the
On button; just plug
it in or flip the switch controlling the outlet to
which the projector is connected. To turn on
this feature, see the online User’s Guide.
If the projector does not turn on, make
sure the power switch on the side of the
projector is turned on.
If your image does not appear, see
“Switching Between Image Sources” or
“Troubleshooting.”
Note: This projector requires a 220 V
power source for normal operation. Limited
functionality is temporarily available when
connected to a 120 V power source. For
details, see your online User Guide.
Changing the Language of
the Projector Menus
The default language of the projector’s
menu system is English, but you can
change it as necessary.
1. Press the
Menu button to acess the
projector’s menu system.
2. Select
Extended > Language.
3. Select your language.
4. When you’re done, press the
Menu
button to exit.
3. Select the screen’s aspect ratio.
Note: The displayed image should match
the screen’s size and shape.
4. When you’re done, press the
Menu
button to exit.
Note: After changing the screen type, you
may need to change the aspect ratio of the
projected image depending on the input
signal. Press the
Aspect button on the
remote control to change the aspect ratio,
if necessary.
Adjusting Image Position
1. Press the
Lens Shift button on the
remote control or projector.
2. Press the arrow buttons to adjust
the position of the projected image.
3. When you’re done, press the
Esc
button to finish the adjustment.
Focusing and Zooming
Press the
Focus or Zoom buttons on
the remote control to adjust the image.
You can also focus and zoom using the
projector buttons.
1. Press the
Focus/Distortion or
Zoom button on the projector.
Troubleshooting
If you see a blank screen or the
message No signal
•
Make sure the status light on the
projector is blue and not flashing,
and the lens cover is removed.
•
Make sure the cables are connected
correctly. See the online User’s
Guide.
•
You may need to change the image
source. See “Switching Between
Image Sources.” Also make sure the
source device is turned on.
If the projector and the notebook
don’t display the same image
Windows
®
Press the function key on your keyboard
that lets you display on an external
monitor. It may be labeled
CRT/LCD or
have an icon such as
. You may
have to hold down the
Fn key while
pressing it (such as
Fn + F7). Wait a
moment for the display to appear. You
may need to press the keys again to
display the image on both devices.
On Windows 7 or later, hold down the
Windows key and press
P at the same
time, then click
Duplicate.
Mac
Open
System Preferences and select
Displays. Click the Arrangement
tab and select the
Mirror Displays
checkbox.
Where to Get Help
Manuals
For more information about using the
projector, you can view or download the
online manuals from the Epson website,
as described below.
Internet support
Visit
www.epson.com/support (U.S.) or
www.epson.ca/support (Canada) and
search for your product to download
software and utilities, view manuals, get
FAQs and troubleshooting advice, or
contact Epson.
Speak to a support representative
To use the Epson
®
PrivateLine
®
Support
service, call (800) 637-7661. This service
is available for the duration of your
warranty period. You may also speak
with a projector support specialist by
dialing (562) 276-4394 (U.S.) or
(905) 709-3839 (Canada).
Support hours are 6
am
to 8
pm
, Pacific
Time, Monday through Friday, and 7
am
to 4
pm
, Pacific Time, Saturday.
Days and hours of support are subject
to change without notice. Toll or long
distance charges may apply.
Purchase supplies and accessories
You can purchase an air filter
(V13H134A52), screens, and other
accessories from an Epson authorized
reseller. To find the nearest reseller,
call 800-GO-EPSON (800-463-7766).
Or you can purchase online at
www.epsonstore.com (U.S. sales) or
www.epsonstore.ca (Canadian sales).
