Epson PriorityFax 1000 Owner'S Manual Download Page 3 | Manualshive

Page: 3 / 52

background image

TELEPHONE INFORMATION

This equipment complies with Part 68 of the FCC Rules. On the rear panel of this equipment is a label that contains, among
other information, the FCC Registration number and Ringer Equivalence Number (REN) for this equipment. You must,
upon request, provide this information to your telephone company.

Ask your telephone company or installer to install the jack suitable for your device if such is not available.

The REN is useful to determine the quantity of devices you may connect to your telephone line and still have those devices

ring when your telephone number is called. In most, but not all, areas, the sum of the RENs of all devices connected to one
line should not exceed five (5.0). To be certain of the number of devices you may connect to your line, as determined by the
REN, you should contact your local telephone company to determine the maximum REN for your calling area.

If your telephone equipment causes harm to the telephone network, the telephone

company

may discontinue your service

temporarily. If possible, they will notify you in advance. But if advance notice isn’t practical, you will be notified as soon as
possible. You will be informed of your right to file a complaint with the FCC.

Your telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the

proper functioning of your equipment. If they do, you will be notified in advance to give you an opportunity to maintain
uninterrupted telephone service.

If you experience trouble with this telephone equipment, please contact the manufacturer’s authorized service agency for
information on obtaining service or repair. The telephone company may ask that you disconnect this equipment from the
network until the problem has bean corrected or unit you are sure that

the

equipment is not malfunctioning.

W A R N I N G

For protection against the risk of electrical shock, always disconnect all cables from the wall outlet before servicing,
modifying, or installing the equipment.

This equipment may not be used on coin service provided by the telephone company nor connected to party lines.

Hearing Aid Compatibility

The telephone with this equipment is hearing aid compatible.

When Programing Emergency Numbers and/or Making Test Calls to Emergency Numbers:

1.

Remain on the line and briefly explain to the dispatcher the reason for the call before hanging up.

2

Call only in the off-peak hours, such as early morning

or

late evenings.

iv

«
1
2
3
4
5
...
»

Summary of Contents for PriorityFax 1000





















































Reviews:

No comments

Related manuals for PriorityFax 1000

APW-895N/IP-420

Brand: SanDisk Pages: 125

Sew Reach ABF Series

Brand: Siruba Pages: 74

Brand: Sagem Pages: 44

Brand: Janome Pages: 43

TRIDENT T26 SC PLUS

Brand: Hillyard Pages: 28

Brand: JUKI Pages: 264

Brand: Rosco Pages: 50

Brand: JUKI Pages: 60

Brand: Haier Pages: 32

Brand: Prochem Pages: 25

Brand: DiamaPro Systems Pages: 10

Brand: De Luxe Pages: 50

Brand: EDNord Pages: 30

Brand: Palamides Pages: 62

Brand: Lucznik Pages: 35

Brand: Sunstar Precision Pages: 26

Executive AN200

Brand: Pocket Pages: 12

Brand: Grace Pages: 88

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands