
Setting Up th e PriorityFax
Rear
Front
hole
Place the output tray in front of you and insert each of the
two wire paper holders into the holes at the edge of the
output tray, as shown below.
To attach
the
output tray to
the
output tray base, locate the
holes on either side of the output tray base. Then
insert the
pegs on
either
side of the output tray into these holes, as
shown below.
Note
This tray can used in a horizontal position instead of
the vertical position shown on the next page. If you plan to
use the tray in the horizontal position, insert the pegs into
the rear slots instead of
the
front holes. Then push the
output tray as far back as it will go.
1-7
Summary of Contents for PriorityFax 1000
Page 1: ......