Epson PP-100II User Manual Download | Manualshive

Page: 11 / 143

background image

Important Notice and Safety Instructions

11

❏

Do not shake ink cartridges; this can cause leakage.

❏

Be careful when you handle used ink cartridges, as there may be some ink remaining
around the ink supply port. If ink gets on your skin, wash the area thoroughly with soap
and water. If ink gets into your eyes, flush them immediately with water. If discomfort or
vision problems remain after a thorough flushing, see a doctor immediately.

❏

Do not remove or tear the label on the cartridge; this can cause leakage.

❏

Install the ink cartridge immediately after you remove it from its package. If you leave a
cartridge unpacked for a long time before using it, normal printing may not be possible.

❏

Use the ink cartridge before the expiration date printed on its package.

❏

Do not dismantle ink cartridges or try to refill them. This could damage the print head.

❏

After bringing an ink cartridge inside from a cold storage site, allow it to warm up at
room temperature for at least three hours before using it.

❏

Store ink cartridges in a cool, dark place.

❏

Do not touch the green IC chip on the side of the cartridge. Doing so may prevent
normal operation and printing.

❏

The IC chip on this ink cartridge retains a variety of cartridge-related information, such
as the ink cartridge status, so that the cartridge may be removed and reinserted freely.
However, each time the cartridge is inserted, some ink is consumed because the
product automatically performs a reliability check.

❏

Do not place ink cartridges with the ink supply area facing down. This may result in ink
leakage. Also, dirt attached to the ink supply area may result in the product not
functioning properly.

Notice for CD/DVD/BD Discs

Before using the product, an operation check should be conducted to ensure the unit’s
functionality. Also, back up the data on the CD/DVD/BD, if needed. Data may be damaged
or lost in the following cases:

-Influence of static or electrical noise
-Incorrect usage
-Malfunction or repair
-Damage due to natural disaster

Epson does not hold any responsibility for lost or damaged data, due to causes not limited
to those listed above, even the product is under warranty period.

«
...
9
10
11
12
13
...
»

Summary of Contents for PP-100II
















































































































































Reviews:

No comments

Related manuals for PP-100II

NetLink 2960 RAS

Brand: Patton electronics Pages: 2

Brand: Samsung Pages: 65

Brand: Freescale Semiconductor Pages: 921

Brand: 3Com Pages: 18

Brand: Supermicro Pages: 24

Brand: Nvidia Pages: 115

Brand: u-blox Pages: 29

Brand: Buffalo Pages: 2

Brand: MC Pages: 21

Brand: Daedalon Pages: 6

EZ-Extender Analog 120-Pin Probing Board

Brand: Analog Devices Pages: 29

Seven Solutions WR-ZEN Series

Brand: Orolia Pages: 167

Brand: SurfControl Pages: 2

EK-FC750 GTX Series

Brand: ekwb Pages: 2

Brand: CAME Pages: 32

Brand: RR-Concepts Pages: 12

Brand: Omron Pages: 14

WAFER-EHL Series

Brand: IEI Technology Pages: 142

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands