Epson PowerLite W16SK User Manual Download Page 91

Page: 91 / 179

• To remove dust or smudges, gently wipe the lens with lens-cleaning paper.

• To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe the

lens. Do not spray any liquid directly on the lens.

Warning:

Do not use a lens cleaner that contains flammable gas. The high heat generated by the

projector lamp may cause a fire.

Caution:

Do not use glass cleaner or any harsh materials to clean the lens and do not subject the lens

to any impacts; you may damage it. Do not use canned air, or the gases may leave a residue. Avoid
touching the lens with your bare hands to prevent fingerprints on or damage to the lens surface.

Parent topic:

Projector Maintenance

Cleaning the Polarizing Filters

To remove dust, dirt, or smudges from the polarizing filters, use a soft, dry, lint-free cloth.

Caution:

Do not use any abrasive materials to clean the filters and do not handle them roughly as they

can be easily damaged.

Parent topic:

Projector Maintenance

Summary of Contents for PowerLite W16SK




















































































































































































Search results

Summary of Contents for PowerLite W16SK

Reviews:

Epson PowerLite W16SK, User Manual, Page: 91 / 179

Search results

Summary of Contents for PowerLite W16SK

Reviews: