Epson PowerLite W16SK User Manual Download Page 58

Page: 58 / 179

Related references

Changing the Color Mode

You can change the projector's Color Mode using the remote control to optimize the image for your
viewing environment.

Turn on the projector and switch to the image source you want to use.

If you are projecting from a DVD player or other video source, insert a disc or other video media and
press the play button, if necessary.

Press the

Color Mode

button on the remote control to change the Color Mode.

The image appearance changes and the name of the Color Mode appears briefly on the screen.

To cycle through all the available Color Modes for your input signal, press the

Color Mode

button

repeatedly.

Parent topic:

Color Mode

Available Color Modes

You can set the projector to use these Color Modes, depending on the input source you are using:

2D Images

Color Mode

Description

Dynamic

Best for video games in a bright room

Presentation

Best for color presentations in a bright room

Theatre

Best for movies projected in a dark room

Summary of Contents for PowerLite W16SK




















































































































































































Search results

Summary of Contents for PowerLite W16SK

Reviews:

Epson PowerLite W16SK, User Manual, Page: 58 / 179

Search results

Summary of Contents for PowerLite W16SK

Reviews: