4.
Select the
Auto Iris
setting and choose one of the following:
•
High Speed
to adjust brightness as soon as the scene changes.
•
Normal
for standard brightness adjustment.
Note:
You can set
Auto Iris
for each Color Mode that supports the feature.
5.
Press
Menu
or
Esc
to exit the menus.
Parent topic:
Color Mode
Using Picture in Picture
You can use Picture in Picture mode to view two image sources simultaneously.
Note:
You can display only HDMI video sources when Picture in Picture mode is active.
1.
Turn on the projector and switch to the HDMI image source you want to use.
2.
Press the
P-in-P
button on the remote control.
The second HDMI video source appears as a sub-screen in the corner of the image.
Note:
While Picture in Picture mode is active, press the
Menu
button on the remote control to adjust
the size and position of the sub-screen.
3.
To swap the main screen and sub-screen video sources, press and hold the
P-in-P
button for at
least three seconds.
4.
Press the
P-in-P
button again to close the sub-screen and resume normal projection.
Available Picture in Picture Options
Parent topic:
Using Basic Projector Features
57
Summary of Contents for PowerLite Home Cinema 5025UB
