Epson PowerLite Home Cinema 5025UB User Manual Download Page 35

Page: 35 / 171

Turning Off the Projector

Before turning off the projector, shut down any computer connected to it so you can see the computer
display during shutdown.

Note:

Turn off this product when not in use to prolong the life of the projector. Lamp life will vary

depending upon mode selected, environmental conditions, and usage. Brightness decreases over time.

Note:

When using the Blank feature, the projector lamp is still on. To turn off the lamp, turn off the

projector.

Press the power button on the projector or the

Standby

button on the remote control.

The projector displays a shutdown confirmation screen.

Press the power button on the projector or the

Standby

button on the remote control again. (To

leave it on, press any other button.)

The shutter closes, the lamp turns off, and the Status light turns off.

To transport or store the projector, make sure the Status light is off, then unplug the power cord.

Summary of Contents for PowerLite Home Cinema 5025UB












































































































































































Search results

Summary of Contents for PowerLite Home Cinema 5025UB

Reviews:

Related manuals for PowerLite Home Cinema 5025UB

Brands by name

Popular brands

Epson PowerLite Home Cinema 5025UB, User Manual

Search results

Summary of Contents for PowerLite Home Cinema 5025UB

Reviews:

Related manuals for PowerLite Home Cinema 5025UB

Brands by name

Popular brands