Epson PowerLite Home Cinema 2000 User Manual Download Page 48

Page: 48 / 179

Press the power button again. (To leave it on, press any other button.)

The projector beeps twice, the lamp turns off, and the Status light turns off.

Note:

With Epson's Instant Off technology, there is no cool-down period so you can pack up the

projector for transport right away (if necessary).

Caution:

Do not turn the projector on immediately after turning it off. Turning the projector on and off

frequently may shorten the life of the lamp.

To transport or store the projector, make sure the Status light is off, then unplug the power cord.

Caution:

To avoid damaging the projector or lamp, never unplug the power cord when the Status

light is on or flashing.

Close the projector's lens cover.

Summary of Contents for PowerLite Home Cinema 2000




















































































































































































Search results

Summary of Contents for PowerLite Home Cinema 2000

Reviews:

Related manuals for PowerLite Home Cinema 2000

Brands by name

Popular brands

Epson PowerLite Home Cinema 2000, User Manual

Search results

Summary of Contents for PowerLite Home Cinema 2000

Reviews:

Related manuals for PowerLite Home Cinema 2000

Brands by name

Popular brands