Epson PowerLite EB-L520W Page 236 User Manual Download

Page: 236 / 267

236

• If available, turn on one of the remote receivers in the projector's menu system, or check if all the

remote receivers were turned off.

• If the remote receiver setting is off, press and hold the

Menu

button on the remote for at least 15

seconds to restore the default setting.

• If you assigned an ID number to the remote control to operate multiple projectors, you may need to

check or change the ID setting (feature not available with all projectors).

• If you lose the remote control, you can purchase another from an authorized Epson reseller.

Parent topic:

Solving Projector or Remote Control Operation Problems

Related references

Projector Setup Settings - Extended Menu
Projector Feature Settings - Settings Menu
Remote Control Operation

Solutions to Password Problems

If you cannot enter or remember a password, try the following solutions:

• You may have turned on password protection without first setting a password. Try entering

0000

using

the remote control. If you lose the remote control, you cannot enter a password. Order a new one from
Epson.

• If you have entered an incorrect password too many times and see a message displaying a request

code, write down the code and contact Epson. Do not attempt to enter the password again. Provide
the request code and proof of ownership for assistance in unlocking the projector.

• If you set a Epson Web Control password and forgot the user ID or password, try entering the

following:

• User ID:

EPSONWEB

• Default password:

admin

• If you set a Remote password (in Epson Web Control) and forgot the user ID or password, try entering

the following:

• User ID:

EPSONREMOTE

• Default password:

guest

Summary of Contents for PowerLite EB-L520W












































































































































































































































































Search results

Summary of Contents for PowerLite EB-L520W

Reviews:

Related manuals for PowerLite EB-L520W

Brands by name

Popular brands

Epson PowerLite EB-L520W, User Manual

Search results

Summary of Contents for PowerLite EB-L520W

Reviews:

Related manuals for PowerLite EB-L520W

Brands by name

Popular brands