Epson PowerLite 4100, Operator'S Manual

Page: 142 / 459

122 Troubleshooting
To enter the hex dump mode, do one of the following:
•
Press and hold LINE FEED and FORM FEED and then turn on printer
to place printer in 10 pitch hex dump mode.
The printer prints all transmissions from the host in hex dump format
on 13.6-in. lines.
•
Press and hold ON LINE, LINE FEED, and FORM FEED and then turn
on printer to place printer in 17.14 pitch hex dump mode.
The printer prints all transmissions from the host in hex dump format
on 8-in. lines.
A hex dump shows both the hexadecimal value of all characters received
by the printer and, where possible, also prints the character itself in the
right-hand column. (See the example.) Unprintable characters are
represented as a period (.).
To exit the hex dump mode, turn off printer.
Hex Dump Mode Printout (Example)
JB0-AL