Input Signal Settings - Signal Menu
Normally the projector detects and optimizes the input signal settings automatically. If you need to
customize the settings, you can use the Signal menu. The available settings depend on the currently
selected input source.
Note:
You can restore the default settings of the
Position
,
Tracking
, and
Sync
settings by pressing the
Auto
button on the remote control.
To change settings for an input source, make sure the source is connected and select that source.
Setting
Options
Description
Resolution
Auto
Sets the input signal resolution if
not detected automatically using
Wide
the
Auto
option
Normal
Aspect
See the list of available aspect
Sets the aspect ratio (width-to-
ratios
height ratio) for the selected input
source
Tracking
Varying levels available
Adjusts signal to eliminate vertical
stripes in computer images
131
Summary of Contents for PowerLite 1224
