Epson picturemate PM 310, User Manual

Page: 24 / 40

22
Maintaining Your Printer PictureMate PM 300 / PM 310
c
Caution:
❏
Never use alcohol or thinner to clean the
printer, as these chemicals can damage
the components as well as the case.
❏
Be careful not to get water on the printer
mechanism or electronic components.
❏
Do not use a hard or abrasive brush.
❏
Do not spray the inside of the printer with
lubricants. Unsuitable oils can damage the
mechanism. Contact your dealer or a
qualified service person if lubrication is
needed.
Transporting Your Printer
The printer's handle makes it easy to carry short
distances. If your printer is going to travel a longer
distance, you should pack it carefully following the
steps below to protect it from getting damaged.
c
Caution:
Keep the printer and its remote controller out of
the sun and don't leave them in your car or other
location where they can get too hot.
1. If the printer is on, turn it off.
2. Wait until the LCD screen goes blank, then unplug
the power cord from the electrical outlet.
3. Remove paper from the paper feeder and output
tray.
4. Close the paper feeder and detach the output tray.
5. Slide the LCD screen down.
6. Disconnect the power cord and any connected
USB cable.
7. Pack the power cord, AC adapter, paper, spare
photo cartridge, remote controller, output tray, and
this manual in a cardboard box.