Basic Photo Printing
21
When using pre-cut Photo Stickers
If you are printing on pre-cut 16-up Photo Stickers, and
the printing is misaligned, follow the steps below to
adjust the print position.
1.
Press the
Menu
button.
2.
To move the image up or down, select
Stckr
Up/Down
. To move the image to the left or right,
select
Stckr
Lft/Rt. Then press the
OK
button.
3.
Use the
l
or
r
button to select the amount to move
the image. Then press the
OK
button.
You can select from
Left2.5mm
to
Right2.5mm
,
and from
Down2.5mm
to
Up2.5mm
.
4.
Press the
z
Print button to start printing.
Note:
❏
If
Print Preview
is set to
On
, the confirmation
screen is displayed. Press the
z
Print button
again to start printing.
❏
The printer remembers the print adjustment
setting even after it has been turned off, so
you do not need to adjust the position each
time.
Printing Camera-Selected DPOF Photos
If your camera supports DPOF (Digital Print Order
Format), you can use it to preselect which photos and
how many copies you want to print. See your camera’s
manual to choose photos for printing with DPOF, then
insert your memory card in PictureMate. PictureMate
automatically reads your preselected photos.
1.
Load paper and a memory card that contains
DPOF data. The screen below appears on the
LCD screen.
2.
Press the
Layout
button to select the layout.
3.
Press the
z
Print button to start printing.
Note:
If you want to print all of the photos on the memory
card, press the Cancel button. See “Printing All
Photos” on page 17.
