Epson PERFECTION V10, Service Manual

Page: 35 / 77

EPSON Perfection V10/V100 Photo/V200 Photo/V350 Photo Revision B
DISASSEMBLY/ASSEMBLY Disassembly of Main Unit 35
4.3.2 Document Cover
1. Disengage the Hinge (4.3.1 Hinge Disengagement on page 34) , and remove the
Document Cover.
4.3.3 Upper Housing
1. Disengage the Hinge (4.3.1 Hinge Disengagement on page 34) , remove the
Document Cover/TPU Unit/AFL Unit.
2. Remove the two screws (C.B.P. 3x8, 5-7 kgf.cm) that secure the Upper Housing.
3. Lift up the Upper Housing from the Hinge side, and release hook A near the
Function Buttons.
4. Slide the Upper housing to the other side of the Hinge, releasing three hooks, and
remove the Upper Housing from the Lower Housing.
Figure 4-4. Removing the Upper Housing
C H E C K
P O I N T
Instead of the Document Cover, Perfection V100 Photo/V200
Photo/V350 Photo are equipped with TPU Unit/AFL Unit.
For disassembly of the TPU Unit/AFL Unit, see the sections given
below.
„ Perfection V100 Photo/V200 Photo:
4.4.1 TPU Upper Housing P43
„ Perfection V350 Photo:
4.5.1 Separation of AFL Upper Housing Assy/AFL Lower Housing
Assy P46
C H E C K
P O I N T
„ Even after disengaging the Hinge, Perfection V100 Photo,
Perfection V200 Photo and Perfection V350 Photo are
connected to the main unit with a cable, therefore place the
TPU/AFL unit next to the main unit to carry on the procedures
below.
„ The Perfection V10 was used to illustrate the disassembly of the
scanner main unit, therefore the color or some parts may differ
from the Perfection V100 Photo/V200 Photo/V350 Photo. The
procedures themselves, however do not differ between the three
models.
C.B.P. 3x8 Hook
Hinge
Upper Housing
Hook A