Epson PERFECTION V10, Service Manual

Page: 43 / 77

EPSON Perfection V10/V100 Photo/V200 Photo/V350 Photo Revision B
DISASSEMBLY/ASSEMBLY Disassembly of TPU 43
4.4 Disassembly of TPU
4.4.1 TPU Upper Housing
1. Disengage the Hinge. (4.3.1 Hinge Disengagement on page 34)
2. Slide the TPU Housing Mat in the direction of the arrow, releasing it from the
sockets of the TPU Unit and remove it.
Figure 4-24. Removing the Housing Mat
3. Remove the four screws (C.B.P 3x8, 5-7 kgf.) that secure the TPU Upper Housing.
Figure 4-25. Removing the TPU Upper Housing (1)
4. Using a flat-blade screwdriver, push outward on the left and right sides of the TPU
Upper Housing frame to widen it and release the two Hook A.
5. Disengage the two Hook B by pinching them.
6. Slide the TPU Lower Housing in the direction of the arrow, then release the four
Hook C, and remove the TPU Upper Housing.
Figure 4-26. Removing the TPU Upper Housing (2)
Socket
TPU Housing Mat
TPU Unit
C.B.P. 3x8
TPU Upper
Housing
Hook A
Hook B
Hook C
TPU Upper Housing
TPU Lower Housing