Epson Perfection 3200 Photo, Service Manual

Page: 63 / 78

EPSON Perfection 3200 Photo Revision A
Maintenance Overview 58
6.1.2 Lubrication
When the carriage unit needs to be replaced, or the operation sound of the
carriage movement becomes noisy, it is necessary to apply lubrication. Refer
to Table 6-1 for the lubricant that can be used. The lubrication points are shown
in Table 6-2 and on the following page.
NOTE: “E” means exclusive product for EPSON. (Not available on the
market)
Figure 6-1. Lubrication Points 1
Figure 6-2. Lubrication Points 2
Table 6-1. Recommended Grease
Type Name
Supply
Quantity Part No. Specification
Grease G-26 40g B702600001 E*
Table 6-2. Lubrication Points
Figure Lubrication Points Lubrication
6-1 Driven shaft D of driven pulley assembly holder G-26 (1x3mm)
6-2
Drive shaft A, drive shaft B and drive shaft C of
drive pulley assembly holder.
G-26 (1x3mm)
C A U T I O N
Excessive lubrication may damage the mechanism part or
cause the malfunction of the operation.
Lubrication Point (G-26)
Lubrication Point (G-26)