Epson Perfection 3200 Photo, Service Manual

Page: 49 / 78

EPSON Perfection 3200 Photo Revision A
Disassembly and Assembly DISASSEMBLY AND ASSEMBLY 44
4.2.8 Timing Belt/CR Motor Removal
1. Release the carriage lock. (See Section 4.2.1.)
2. Remove the document cover. (See Section 4.2.2.)
3. Remove the upper cover. (See Section 4.2.3.)
4. Remove the carriage unit. (See Section 4.2.5.)
5. Remove the two screws (CBS, M3x5) that are securing the CR motor unit.
(See Figure 4-24)
6. Disconnect the CR motor connector (CN7) and disengage the hook, and
then remove the CR motor unit. (See Figure 4-25)
1.Remove the flange pulley.
2.Remove the flat washer.
3.Remove idle pulley _A.
4.Remove the idle pulley.
5.Remove the drive pulley.
Figure 4-24. CR Motor Removal (1)
Figure 4-25. CR Motor Removal (2)
Pass the CR motor unit cable under the shield plate and
then connect it to the main circuit board.
CBS Screws (3x5)
Tightening Torque : 6-8kgfcm
CR Motor Unit
CR Motor
Connector
Hook
CR Motor Unit