Epson Perfection 3200 Photo, Service Manual, Page: 47 / 78

EPSON Perfection 3200 Photo Revision A
Disassembly and Assembly DISASSEMBLY AND ASSEMBLY 42
Figure 4-20. Main Circuit Board
4.2.7 Timing Belt/Driven Pulley Assembly Removal
1. Release the carriage lock. (See Section 4.2.1.)
2. Remove the document cover. (See Section 4.2.2.)
3. Remove the upper cover. (See Section 4.2.3.)
4. Remove the carriage unit. (See Section 4.2.5.)
5. Remove the two screws (CBS, M3x5). (See Figure 4-21)
6. Remove the driven pulley assembly from the base frame, and then remove
the timing belt. (See Figure 4-22)
1.Remove the flange pulley. (See Figure 4-23)
2.Remove the driven pulley. (See Figure 4-23)
Figure 4-21. Driven Pulley Assembly Removal (1)
Driven Pulley
Assembly
CBS Screws (3x5)
Tightening Torque : 8-10kgfcm
Timing Belt