3. Environment and Installation
Part Feeding 7.0 IF-240 Rev.7
15
3.2 Base Table
A table to secure feeder needs to be made by customers. The shape and size of table
depending on purpose of your feeder system. Also, when using multiple feeders or
multiple robots, note that vibration can interfere other equipment.
For details of designing of mounting table, refer to
3.5 Installing.
3.3 Installing IF-240
CAUTION
■
The feeder must be mounted on a smooth, flat and solid surface. Ensure that the
IF-240 is not submitted to mounting flexure. Failure to do so will degrade feeder
performance.
■
Be careful not to get hands or feet caught and/or have equipment damaged by a
fall of the feeder. When working, please wear protective equipment including
safety shoes.
To ensure proper behavior of the IF-240, secure fastening to a solid surface is necessary.
The holes in the base plate of the IF-240 can be used to attach it with four M6 screws.
Repeatable positioning of the IF-240 can be done by using positioning pins (possible on
both sides).
Figure 3-1: Installing IF-240
Summary of Contents for Part Feeding 7.0 IF-240
