Epson Panorama Stitcher Light EP and QuickTime 5 Reference Manual Download Page 75

Page: 75 / 216

Lamp Property

Applies To

Vision Calibration

Description

Sets / returns the output bit used for the calibration lamp.

Usage

VGet

Calibration.

Lamp,

var

VSet

Calibration.

Lamp,

value

Calibration

Name of a calibration or string variable containing a calibration name.

var

Integer variable that will contain the value of the property.

value

Integer expression for the new value of the property.

Values

Integer value of a valid standard output bit.

Remarks

Use the Lamp property to automatically turn on a lamp for calibration. Use the LampDelay property to
allow time for a lamp to turn on before calibration continues.

Summary of Contents for Panorama Stitcher Light EP and QuickTime 5

























































































































































































































Search results

Summary of Contents for Panorama Stitcher Light EP and QuickTime 5

Reviews:

Epson Panorama Stitcher Light EP and QuickTime 5, Reference Manual, Page: 75 / 216

Search results

Summary of Contents for Panorama Stitcher Light EP and QuickTime 5

Reviews: