16
Getting Started
❏
If the date and time settings are erased, the Date and
time settings screen is displayed when you turn on
P-2000 next time.
❏
After changing the battery, make sure that the date and
time is set correctly. If necessary, set the date and time
again.
❏
You can change the settings later. See “Changing the
P-2000 Settings” on page 55 for details about setting
the date and time settings.
Turning the power off
1.
Make sure that the
Access
lamp is off.
2.
Slide the power switch to
as shown below and
hold it down for several seconds until the
illumination
lamp turns off. The power switch
will return to the original position.
illumination
lamp
Summary of Contents for P-2000 - Multimedia Storage Viewer
Page 1: ... User s Guide ...
Page 6: ...vi ...