Epson OmniLink TM-T70-i Technical Reference Manual Download Page 92

Page: 92 / 120

System Settings - Security - SSL

he SSL comm

uni

tting

Item

Description

Disable

Disables SSL authentication.

Remove the

certificate

Select this checkbox to delete the SSL certificate.

Enable

Enables SSL authentication.

Update the

certificate

Renews certificates registered to this product.

Create the self

signed certificate

Registers the self-signed certificate to this product.

Private key file

Selects private key files registered to this product.

Certificate file

Selects server certificate files registered to this product.

Certificate chain

file

Selects certificate chain files registered to this product

Apply

Saves settings to TM-T70-i.

Download

You can download certificate files (including self signed

certificates) for this product.



This product only supports TLS. SSL3.0 is not supported.



HTTP communication is not available when SSL is enabled.



When SSL is enabled, it will take about 1 minute and 30 seconds after the printer is turned
on for printing to be possible.

Summary of Contents for OmniLink TM-T70-i

























































































































Search results

Summary of Contents for OmniLink TM-T70-i

Reviews:

Related manuals for OmniLink TM-T70-i

Brands by name

Popular brands

Epson OmniLink TM-T70-i, Technical Reference Manual

Search results

Summary of Contents for OmniLink TM-T70-i

Reviews:

Related manuals for OmniLink TM-T70-i

Brands by name

Popular brands