I am using iOS or Android mobile devices. Is the Mobilink P60II compatible?
Yes. Using Epson’s SDK , apps to run the Mobilink P60II can be developed for iOS and Android
devices. Go to http://pos.epson.com/mobilesdks/index.htm to learn more about the EPSON SDK
solutions and download the right SDK for your application.
Is Mobilink P60II compatible with the previous generation of Mobilink?
The Mobilink P60II is compatible with the previous generation of Mobilink. However, there are small
hardware differences between the two generations. For example, the last generation Mobilink P60
has a serial connector and the new generation Mobilink P60II has a mini-USB connector. If you are
currently using serial connector to print, you will have to change the cable and update the software on
your PC that communicates with the printer.
What type of emulation support does the Mobilink P60II offer to speed up my deployment
time?
The Mobilink P60II has various emulations available to support your application requirements such as:
•
ZPLII
•
CPCL
•
EPLII
Does the Mobilink P60II support barcode printing?
Yes. The Mobilink P60II can support various linear or one-dimensional (1D) and two dimensions (2D)
barcode printings such as:
•
1D - EAN-8,EAN-13, UPC-A, UPC-E, JAN13, JAN8, Code 39, Code 93, Code 128, ITF,
CODEBAR, GS-1-128, GS1 DataBar,, GS1 DataBar Truncated, GS1 DataBar Limited, GS1 DataBar
Expanded
•
2D - QR Code, Maxi Code, PDF417, Composit, Data matrix, RSS/GS1 and Aztec
How long does the
Mobilink P60II’s battery last?
Based on Epson testing, the battery for the Mobilink P60II can last up to 27 hours for WiFi and up to
46 hours for Bluetooth. Battery life can vary significantly depending on usage.
What can I do to maintain my battery life for best performance?
•
Use only the battery pack designed for use with the Mobilink P60II
•
Fully charge the battery prior to use
•
If the printer is being stored, remove the battery prior to storage
What is included in the box?
•
Mobilink P60II
•
Battery (Model: OT-BY60II)
•
Roll paper (For checking initial movement of the printer)
•
User’s manual
•
USB cable saddle
•
Belt clip (already attached to printer)
•
58 mm spacer (already attached to printer)
