Customizing Power and Operation
49
■
Display
Messages:
Lets you turn screen messages on or off.
Display Background:
Sets the screen background to
Black
,
Blue
, or
Logo
when no
image signal is available.
Startup Screen:
Enables or disables display of the startup (User’s Logo) screen when the
projector is turned on.
A/V Mute:
Sets the screen background to
White
(default),
Black
,
Blue
, or
Logo
when
the
A/V mute button is pressed.
■
Closed Caption
Turn this setting on to display closed captioning for content that provides it. This feature
is only available with composite video sources (MG-850HD).
■
User’s Logo
Create a custom startup screen, as described on page 52.
■
Projection
Select
Front
(to project onto the front of a screen),
Front/Ceiling
(when the projector is
mounted upside-down from the ceiling),
Rear
(to project from behind onto a transparent
screen), or
Rear/Ceiling
(to project from behind onto a transparent screen when the
projector is mounted upside-down from the ceiling).
Note:
When an iPod is docked, this setting is grayed out and locked to
Front
. To change the
setting, first exit the menu and remove the iPod from the dock.
If you hold down the
A/V mute button on the remote control for about five seconds, the
projector switches between
Front
and
Front/Ceiling
or
Rear
and
Rear/Ceiling
.
■
Operation
Direct Power On:
Enable if you want
the projector to turn on when you connect the
power cord (without pressing the
P
power
button).
Note:
If
Direct Power On
is enabled, the power cord is connected, and a power outage occurs,
the projector will start when the power is restored.
Sleep Mode
: Turns the projector off automatically if it is idle and no signal is received
for 5, 10, or 30 minutes (you can adjust the amount of time in the
Sleep Mode
setting
menu).
Lens Cover Timer
: Enabled by default to turn the projector’s power off automatically
when the
A/V Mute
slide is closed for more than 30 minutes.
