108
Note:
If you are reading these instructions online, you will lose your Internet connection when you
restart your router.
• Check to see if your wireless router or access point has an enabled Privacy Separator function that is
preventing printing from a device over the network. See your router or access point documentation for
instructions on disabling the Privacy Separator function.
• If you are connecting the product via Wi-Fi Protected Setup (WPS) and the
Wi-Fi light on your
product is not solid green, make sure you press the
Wi-Fi
button on the product within 2 minutes of
pressing the WPS button on your router. Hold down the
Wi-Fi
button on the product for 5 seconds or
until the
Wi-Fi and
Wi-Fi Direct lights start blinking.
• If you are connecting the product via EpsonNet Setup and the
Wi-Fi light on your product is not
solid green, make sure your product software was installed correctly. If necessary, reinstall your
software.
Parent topic:
Related tasks
Printing a Network Status Sheet
Solving Paper Problems
Check these sections if you have problems using paper with your product.
Paper Feeding Problems
Paper Jam Problems
Paper Ejection Problems
Parent topic:
Paper Feeding Problems
If you have problems feeding paper, try these solutions:
• Make sure the paper cassette is inserted all the way in the printer.
• If paper does not feed correctly, remove and reload it in the cassette and adjust the edge guides.
Make sure the paper stack is not above the tab on the edge guides inside the cassette.
• If multiple pages feed at once, remove the paper, fan the edges to separate the sheets, and reload it.
• Do not load more than the recommended number of sheets.
• Make sure your paper meets the specifications for your product.
• If paper jams when you print on both sides of the paper, try loading fewer sheets.
Summary of Contents for M1120
Page 1: ...M1120 User s Guide ...
Page 2: ......
Page 8: ......