Next pull the paper up until the top is above the pin-feed holders.
Fit the holes on the left side of the paper over the pins in the left
holder and close the cover. Now fit the right side of the paper in the
right holder, moving the holder as needed to match the width of
the
paper. Close the second cover, make sure the paper has no dips or
wrinkles, lock the right holder in place, and push the paper bail
against the paper.
Now you are ready to set the top of page position. Turn the
paper-feed knob to advance the paper until a perforation between
sheets is approximately l/8 of an inch below the top of the ribbon
guide, as you see in Figure E-8.
Figure E-8. Top
of
page position
When you turn on your LX-86, it will remember this top of page
setting and will use it when any program tells it to move to the top of
the next page. If you later find that your word processing or other
applications program is putting your printing too high or too low on
the page or is printing on the perforations, check to see that your top
of page setting is correct.
Once you have set the top of page, each time you finish printing a
document, push the ON LINE button to put the printer off-line and
then push the FF button once o advance the paper so that you can
tear off your just-printed page and the paper will be in the right
position to begin the next docume n t .
E-6
Summary of Contents for LX-86
Page 1: ...EPSON LX 86 TM PRINTER User s Manual ...
Page 30: ......
