Epson LX-1170II, User Manual

Page: 31 / 168

Paper Handling
31
2
2
2
2
2
2
2
2
2
2
2
2
c
Caution:
Never use the paper feed knob to adjust the tear-off position; this
may damage the printer or cause it to lose the tear-off position.
Note:
Your tear-off position setting remains in effect until you change it, even
if you turn off the printer.
1. Make sure the Tear Off (Font) lights are flashing (the paper
is at the current tear-off position). You may need to press the
Tear Off (Font) button to advance the paper to the tear-off
position.
2. Open the paper guide cover.
3. Hold down the Pause button for about three seconds. The
Pause light begins to flash and the printer enters the Micro
Adjust mode.
4. Press the LF/FF
D
button to feed the paper backwards, or press
the Load/Eject
U
button to feed the paper forwards, until the
paper perforation is aligned with the tear-off edge.
* tear-off edge
*