If you are using an external 5 1/4-inch diskette
drive
and have set
DIP switch 2 on the back panel off, your computer recognizes the
external diskette drive as A and the internal drive as B. In this case,
you need to confirm or adjust the setup settings for both
Drive A
and
Drive B.
When you first select
Mass storage from the
setup main menu, you may see the following display:
Exit
Memory
Display
Coprocessor
Mass storage
Backlight period
Gray scale
Drive B(internal): None (BAD SETTING)
Drive C
: Type 2(20MB)
******* SAVE SETTINGS ********
Do not be concerned about the message
BAD
SETTING
. This is
merely to remind you to adjust the settings for both of your diskette
drives.
When you have entered the correct setup information for both
diskette drives, highlight
SAVE
SETTINGS
and press
Enter.
The
main setup menu reappears.
2-8
Running the Setup Program
