Note:
Click Confirm to verify the certificate information.
Related Information
&
“Accessing Web Config” on page 20
Encrypted Communication Using IPsec/IP Filtering
About IPsec/IP Filtering
If the printer supports IPsec/IP Filtering, you can filter traffic based on IP addresses, services, and port. By
combining of the filtering, you can configure the printer to accept or block specified clients and specified data.
Additionally, you can improve security level by using an IPsec.
To filter traffic, configure the default policy. The default policy applies to every user or group connecting to the
printer. For more fine-grained control over users and groups of users, configure group policies. A group policy is
one or more rules applied to a user or user group. The printer controls IP packets that match with configured
policies. IP packets are authenticated in the order of a group policy 1 to 10 then a default policy.
Configuring Default Policy
A
Access Web Config and select
Network Security Settings
>
IPsec/IP Filtering
>
Basic
.
B
Enter a value for each item.
C
Click
Next
.
A confirmation message is displayed.
D
Click
OK
.
The printer is updated.
Related Information
&
“Accessing Web Config” on page 20
&
“Default Policy Setting Items” on page 39
Network Guide
Security Settings
38
