manualshive.com logo in svg

Epson LQ-570e, User Manual

The Epson LQ-570e is a reliable dot matrix printer designed for high-speed printing. It guarantees crisp, clear text documents and graphics. Enhance your printing experience by downloading the user manual from manualshive.com for free. This comprehensive manual provides step-by-step instructions to optimize your printer's performance and functionality.

Share
Download
background image

7-10      

Troubleshooting

Wrong tear-off position

The printer prints on (or too far away from) the perforation of 
your continuous paper.

 Cause

What to do

The tear-off position setting 
is incorrect.

Adjust the tear-off position using the 
micro adjust feature. See “Adjusting 
the tear-off position” on page 2-35.

You moved the paper using 
the knob while the printer 
was on.

Adjust the tear-off position using the 
micro adjust feature. See “Adjusting 
the tear-off position” on page 2-35.

 

c

Caution:

Never use the knob to adjust the tear-off position; this may damage the 
printer or cause it to lose the tear-off position.

The printer you want to use 
is not selected in your 
software.

Choose the correct printer from the 
Windows desktop or in your 
application before printing.

The paper size setting in 
your application or printer 
driver does not match the 
size of the paper you are 
using.

Check the paper size setting in your 
application or printer driver.

The printer’s page length 
settings for the tractor do not 
match the size of the 
continuous paper you are 
using.

Check the page length settings for the 
tractor using the printer’s default-
setting mode or the EPSON Remote! 
utility. See “About Your Printer’s 
Default Settings” on page 5-4 or 
“Using the EPSON Remote! Utility” 
on page 4-30.

Summary of Contents for LQ-570e

























































































































































































































































Reviews:

No comments

Related manuals for LQ-570e

Canon iPF650 - imagePROGRAF Color Inkjet Printer Basic Manual preview
iPF650 - imagePROGRAF Color Inkjet Printer
Brand: Canon Pages: 40
Canon iP90 - PIXMA Color Inkjet Printer Easy Setup Instructions preview
iP90 - PIXMA Color Inkjet Printer
Brand: Canon Pages: 2
Canon iPF650 - imagePROGRAF Color Inkjet Printer Install Manual preview
iPF650 - imagePROGRAF Color Inkjet Printer
Brand: Canon Pages: 16
Canon iP100 - PIXMA Color Inkjet Printer Setup Instructions preview
iP100 - PIXMA Color Inkjet Printer
Brand: Canon Pages: 2
Canon imageRUNNER ADVANCE C5560 Configuration And Installation Manual preview
imageRUNNER ADVANCE C5560
Brand: Canon Pages: 67
Canon imageRUNNER 3300 Reference Manual preview
imageRUNNER 3300
Brand: Canon Pages: 366
Canon IMAGERUNNER ADVANCE C5051 Getting Started preview
IMAGERUNNER ADVANCE C5051
Brand: Canon Pages: 252
Canon iPF710 - imagePROGRAF Color Inkjet Printer Operations preview
iPF710 - imagePROGRAF Color Inkjet Printer
Brand: Canon Pages: 2
Magicard Pronto Getting Started Manual preview
Pronto
Brand: Magicard Pages: 26
QMS 3260 Operation preview
3260
Brand: QMS Pages: 194
Z Corporation D4 Operation Manual preview
D4
Brand: Z Corporation Pages: 4
Xerox 770 Safety Manual preview
770
Brand: Xerox Pages: 24
TallyGenicom 2440 Quick Start Manual preview
2440
Brand: TallyGenicom Pages: 38
QMS Magicolor 2 plus Manual preview
Magicolor 2 plus
Brand: QMS Pages: 90
QMS Magicolor 2 Desklaser Quick Setup Manual preview
Magicolor 2 Desklaser
Brand: QMS Pages: 4
QMS 1725E Supplementary Manual preview
1725E
Brand: QMS Pages: 8
QMS 1725E Getting Started Manual preview
1725E
Brand: QMS Pages: 94
QMS 1660E Supplementary Manual preview
1660E
Brand: QMS Pages: 6

Brands by name

Popular brands

Load more brands