58
Paper Handling
Cards
You can feed cards one at a time using the paper guide, or you
can load multiple cards using the optional high-capacity cut-sheet
feeder (bin 1 of the double-bin cut-sheet feeder).
Before loading cards, set the paper-thickness lever to position 2
and set the paper release lever to the single-sheet position.
The cards can be loaded only in the front or rear paper slot.
To load single card, follow the instructions in “Loading paper in
the paper guide” on page 50. To load multiple cards, see “Loading
paper in the high-capacity cut-sheet feeder” on page 183.
Note:
❏
When you are loading postcards long edge first, always load them
in the top slot.
❏
Before printing, turn on the card mode by pressing the
Tear Off/Bin
button several times until the left
Tear Off/Bin
light is on.
Summary of Contents for LQ-2090
