manualshive.com logo in svg

Epson LQ-2090, Reference Manual

Share
Download
Epson LQ-2090 Reference Manual Download Page 30

22

Paper Handling

Note:
For your safety, Epson recommends operating the printer with the 
printer cover closed. The printer will function with the printer cover 
open or removed, but for maximum safety keep the cover closed.

12. Turn on the printer. When the printer receives data, it 

automatically loads the paper and starts printing.

13. After you finish printing, follow the steps in “Removing 

continuous paper” on page 45 to remove your printed 
document.

If the first line on your page appears too high or low, you can 
change its position by using the Micro Adjust function as 
described in “Adjusting the top-of-form position” on page 64.

c

Caution:
Never use the knob to adjust the top-of-form position; this may 
damage the printer or cause it to lose the top-of-form position.

Removing the tractor from the front push position

Follow these steps to remove the tractor from the front push 
position:

1. Make sure the printer is turned off.

2. Remove any paper from the tractor as described in 

“Removing continuous paper” on page 45.

Summary of Contents for LQ-2090

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands