Epson LightScene EV-110 User Manual Download Page 78

Page: 78 / 210

Caution:

Do not turn the projector on immediately after turning it off. Turning the projector on and off

frequently may shorten the life of the laser.

To transport or store the projector, make sure the Status light is off, then unplug the power cord.

Note:

If you use the projector continuously for more than 24 hours, or regularly turn it off by shutting off

the power outlet, schedule periodic

Light Source Calibration

events in the Extended menu schedule

settings.

Parent topic:

Using Basic Projector Features

Related references

Projector Setup Settings - Extended Menu

Selecting the Language for the Projector Menus

If you want to view the projector's menus and messages in another language, you can change the
Language setting.

Turn on the projector.

Press the

Menu

button.

Summary of Contents for LightScene EV-110



















































































































































































































Search results

Summary of Contents for LightScene EV-110

Reviews:

Related manuals for LightScene EV-110

Brands by name

Popular brands

Epson LightScene EV-110, User Manual

Search results

Summary of Contents for LightScene EV-110

Reviews:

Related manuals for LightScene EV-110

Brands by name

Popular brands