131
7.
Select the
Combination
setting, and then select one of the following options:
•
None
to always start the operation set in
GPI-1 Settings
regardless of the GPI-2 signal.
•
GPI-2 Low
to start the operation set in
GPI-1 Settings
when the GPI-2 signal falls below a certain
voltage.
•
GPI-2 High
to start the operation set in
GPI-1 Settings
when the GPI-2 signal exceeds a certain
voltage.
Note:
You can check the current value for the GPI-1 and GPI-2 signals in the
GPI Info.
menu from
DC Out (2.0A)/GPI In
Settings.
8.
Select the
High -> Low
setting, if necessary.
9.
If you need to add a certain amount of time until the selected operation is executed, select
Hold
High
or
Hold Low
.
When the sensor signal is maintained continuously for the set time, the operation is executed.
Note:
You can select from 0 seconds to 30 minutes for the
Hold High
and
Hold Low
settings.
10. Press
Esc
to return to the previous screen, and then select the
GPI-2 Settings
option if necessary.
11. When you are finished, press
Menu
to exit the menus.
Parent topic:
Related tasks
Connecting to External Sensor Devices
Copying Menu Settings Between Projectors
After you select menu settings for your projector, you can transfer them to another projector of the same
model.
Note:
Copy the projector's settings before you adjust the projected image using the projector's image
adjustment settings. Any saved User's Logo setting on the projector will transfer to the other projector.
Caution:
If the copy process fails due to a power failure, communication error, or for any other reason,
Epson will not be responsible for any repair costs incurred.
Summary of Contents for LightScene EV-110
Page 1: ...LightScene EV 110 115 User s Guide ...
Page 2: ......
