Epson LabelWorks Iron-on Kit, User Manual

Page: 32 / 40

30 | Notices
■
Operate the keyboard gently.
■
Take care not to cut your fingers when cutting a
label with scissors.
■
Do not attach a label on human bodies, living
things, public facilities or other people’s
belongings.
■
Do not touch the soleplate of your iron or the label
immediately after it is attached. Doing so may
cause a burn.
■
Make sure the label is ironed down firmly.
Otherwise, the edges of the label may rub or
scratch the skin.
■
Do not let children use an iron unsupervised. Doing
so may cause accidents such as fire or burns.
■
Do not iron wet fabric.
■
Take extreme care when handling your iron.
Battery
■
Use batteries properly to avoid injury or fire caused
by leaking, overheating, explosion, erosion, or
damage to the product.
■
Keep batteries out of reach of children. If battery
acid gets into your eyes or on your skin,
immediately rinse the affected area thoroughly
with water and seek medical treatment. If a battery
is swallowed, seek medical treatment immediately.
■
When replacing batteries, follow these safety
instructions:
• If battery acid leaks from a battery, wipe it off
with a cloth and replace the battery with a new
one.
• Do not use new and old batteries together or
mix different types of batteries.
• Use only AAA alkaline batteries. You cannot use
rechargeable batteries with your product.
• Insert batteries so that the polarities (+ and -)
are correct.
• Remove dead batteries promptly.
• Do not heat batteries or throw them in fire or
water.
• Do not remove batteries with metal objects
such as tweezers or the tip of a pen.
■
Make sure to follow local battery disposal
regulations.