3.
Load paper at the center of the paper support with the printable side facing up.
c
Important:
❏
Do not load more than the maximum number of sheets specified for the paper. For plain paper, do not load
above the line just under the
d
symbol inside the edge guide.
❏
Load paper short edge first. However, when you have set the long edge as the width of the user defined size,
load paper long edge first.
❏
Pre-punched paper
Note:
❏
Load a single sheet of defined size plain paper with binding holes at the left or right.
❏
Adjust the print position of your file to avoid printing over the holes.
4.
Slide the edge guides to the edges of the paper, and then close the feeder guard.
c
Important:
Do not place objects on the feeder guard. Doing so may prevent paper from feeding.
User's Guide
Preparing the Printer
34