Epson l300 User Manual Download Page 81

Page: 81 / 111

Lights

power

paper and

ink

Light status

Condition/solution

The product is turned on.

The

power light is on

The

power light is flashing

The product is busy. Wait for the

power light to stop flashing before

turning off the product.

If you just filled the ink, the

power light will flash for approximately 20

minutes. Do not cancel this process.

Paper is jammed in the product. Remove the jammed paper, and press

The

power light is flashing

the

stop button to clear the error.

The

paper light is flashing

No paper is loaded or multiple sheets fed at one time. Load paper in the

The

power light is flashing

product, and press the

stop button to clear the error.

The

paper light is on

Ink level may be low. It is nearly time to reset the ink levels by refilling

The

power light is on or

the ink. You can continue printing, but you should prepare new ink

flashing

bottles. To confirm the actual ink remaining, visually check the ink levels

The

ink light is flashing

in the product's ink tanks.

Ink level may have reached the lower line of the ink tank and it is time to

The

power light is on or

reset the ink levels. To reset the ink levels, refill the ink.

flashing

The

ink light is on

Caution:

Continued use of the product when the ink level is below the

lower line on the ink tank could damage the product.

Summary of Contents for l300
















































































































Search results

Summary of Contents for l300

Reviews:

Related manuals for l300

Brands by name

Popular brands

Epson l300, User Manual

Search results

Summary of Contents for l300

Reviews:

Related manuals for l300

Brands by name

Popular brands